BGA rework controller

BGA rework controller

Postby rhys » Sat Mar 10, 2012 5:13 am

I'm working on the hardware for a two zone BGA rework controller based on the osPID. I'm a noob at arduino programming though. Anybody interested in helping with the necessary firmware changes?
rhys
 
Posts: 20
Joined: Sat Mar 10, 2012 5:05 am
Location: USA - Indiana

Re: BGA rework controller

Postby rhys » Sun Mar 11, 2012 10:18 pm

It's all good. I think I can handle the backend portion of the modifications, it's the UI I haven't had time to dig into yet, and is probably going to need the most work. I'm kinda waiting till they roll the PID shield profiling code into the osPID code before I dig into modifying it too much. The profile functions are pretty important to my plans :)
rhys
 
Posts: 20
Joined: Sat Mar 10, 2012 5:05 am
Location: USA - Indiana

Re: BGA rework controller

Postby rhys » Wed Nov 07, 2012 4:54 pm

I've finally started to dig into this project, and I'm making progress. I have the second PID loop and most of the IO.h modifications completed, and the hardware design just needs a little more tweaking and it will be ready. I could still use some help with the onboard dash rewrite though if anyone is willing to help. I've started on it, but am stuggling a bit. The frontend looks like it shouldn't be too difficult either, but I haven't started on it yet.
rhys
 
Posts: 20
Joined: Sat Mar 10, 2012 5:05 am
Location: USA - Indiana

Re: BGA rework controller

Postby rabika » Tue Jul 16, 2013 4:50 am

if you want to use v1.6 with your hardware, you'll need to tell the firmware what it's connecting to. you do this in io.h. at the top, there are a series of #define statements. un-comment the two that belong to your input & output cards, and comment out the rest. when you build the firmware it will ignore the code for the other io cards (e.g. the the input card with the 31855 chip,) and will keep the code that pertains to your cards.
pass4sure pass 4 sure
pass4sure 000-540 pass4sure 000-540
pass4sure 000-281 pass4sure 000-281
pass4sure 000-612 pass4sure 000-612
rabika
 
Posts: 1
Joined: Tue Jul 16, 2013 4:44 am

Re: BGA rework controller

Postby Bethany26 » Wed Dec 04, 2013 10:34 am

The main differences are rework stations heat source and heating. Take example only the heat upper or lower and upper, and then heating, some can set the temperature curve. Taking into account the protection of the components, the heating system, both upper and lower is better.
Bethany26
 
Posts: 1
Joined: Wed Dec 04, 2013 10:30 am


Return to Firmware

Who is online

Users browsing this forum: Google [Bot] and 1 guest

cron