Front End Does Not Connect (fixed)

Front End Does Not Connect (fixed)

Postby AustralianRobotics » Thu Mar 22, 2012 10:00 pm

Hi,

Got the osPID and assembled. Works great as standalone PID, but cannot seem to get the front-end to work. Have downloaded the latest firmware for the osPID and the latest front end. Commits respectively:

14bb605705
br3ttb authored 15 days ago

0b609b360f
br3ttb authored 16 days ago

The PID control front does load, and I have all the buttons. Have tried both running the Processing sketch and the Windows executable, but both hang on "connecting". No connection is made and there is no graph or data coming through!
Last edited by AustralianRobotics on Thu Mar 22, 2012 10:05 pm, edited 1 time in total.
AustralianRobotics
 
Posts: 11
Joined: Thu Mar 22, 2012 9:55 pm

Re: Front End Does Not Connect

Postby AustralianRobotics » Thu Mar 22, 2012 10:01 pm

Uhg...works. Just don't click the virtual com port and press connect when there is only one device available. Graph comes!
AustralianRobotics
 
Posts: 11
Joined: Thu Mar 22, 2012 9:55 pm

Re: Front End Does Not Connect (fixed)

Postby Brett » Fri Mar 23, 2012 11:21 am

yes it's still a little clunky. at the very least a little "refresh ports" button would be nice. we're working on it.
User avatar
Brett
Site Admin
 
Posts: 101
Joined: Fri Mar 09, 2012 10:05 pm
Location: Boston


Return to Software

Who is online

Users browsing this forum: No registered users and 1 guest